Flat plate solar collector
Top 4 manufacturer of the flat plate solar collector in the world
Suitable for water, space and process heating with 60℃-80℃ temperature requirements.
Higher efficiency for temperature range under 60 ℃。
Without overheating problem in summer season.
95mm thickness ensures its better energy yield in winter time.
The high quality selective coating material and multiple insulation technologies ensures the high absorption rate, low emission rate and excellent heat preservation performance.
Certified by European Solar Keymark, with European standards annual energy yield.
Annual collector output at 50℃， location Würzburg is 1002kwh for the 2m2 flat plate solar collector. The efficiency under Solar Keymark is 80.5%
Grid dimensions(L x H x D): 2000 x 1000 x 80mm
Gross surface area: 3m2
Mainfold pipe: Φ22mm x 0.8mm (Copper), 2pcs
Riser pipe: Φ10mm x 0.7mm (Copper), 9pcs
Max. working pressure: 0.8Mpa
Max. working temperature: 99°c
Absorber/absorber coating: Aluminum/Blue Titanium or Black chrome
Frame: Aluminum alloy
Glazing material/thickness: Low-iron-super-white textured reinforced glass/3.2
Back plate: Al-Zn steel
Insulation material/thickness: polyester insulation cotton/50mm for bottom, 16mm for side